DIGITEN G3/4 Water Flow Sensor Flowmeter 1-60L/min

The features of this product include waterproof, heat resistance, pressure resistance, and cold resistance. It is easy to install. The frequency formula is F=5.5 * Q (L/Min) with an error of 2%. The current should not exceed 10mA. The flow rate is measured with 330 pulses per liter. Another formula to calculate the frequency is F=constant * units of flow (L/min) * time (seconds). The flow range is from 1 to 60L/min. The maximum current supported is 15mA at DC 5V. The working voltage range is DC 5-18V. The load capacity is around 10mA at DC 5V. The operating temperature ranges from 0 to 80℃, and the operating humidity is between 35% and 90%RH. The compression allowed is water pressure up to 1.75 Mpa. The insulation resistance is greater than 100M OHM. The storage temperature should be between -25 to 80℃, and the storage humidity falls between 25% and 95%RH. The output waveform is a square wave, representing the output pulse signal. The product is ROHS compliant. The cable length is 15cm. The packaging includes a flowmeter. The flow range is 1-60L/min. The water pressure allowed is below 1.75 Mpa. The working voltage range is DC 5-18V. The output waveform is a square wave, representing the output pulse signal. The sensor used is the Hall effect sensor.

product information: