DIGITEN G3/4 Water Flow Hall Sensor Switch

Specification: - External Thread Diameter: G3/4" (BSP) - Frequency: F=5.5 * Q (L / Min) - Error: ±2% - Working Voltage Range: DC 3-24 V - Maximum Current: 15 mA (DC 5V) - Load Capacity: ≤10 mA (DC 5V) - Flow Range: 1-60L/min - Operating Temp: ≤80℃ - Operating Humidity: 35%～90%RH - Allow Compression: Water pressure 1.75 Mpa below - Insulation Resistance: >100M OHM - Storage Temperature: -25℃～+80℃ - Storage Humidity: 25%～95%RH - Output Waveform: Square Wave, output pulse signal - Cable Length: 120cm

Note: 1. The Water Flow Sensor has a light, nimble outline, small size, and is easy to install. The rotating part uses bearings. 2. It has an integrated magnetic hall effect sensor that outputs an electrical pulse with every revolution. The hall effect sensor is sealed off from the water pipe, ensuring the sensor remains safe and dry. 3. Three wire connection: red for positive, black for negative, yellow for pulse signal. The Water Flow Sensor has a light, nimble outline, small size, and is easy to install. The rotating part uses bearings. It has an integrated magnetic hall effect sensor that outputs an electrical pulse with every revolution. The hall effect sensor is sealed off from the water pipe, ensuring the sensor remains safe and dry. The working voltage range is DC 3-24 V. The output waveform is a square wave with an output pulse signal. The sensor is waterproof, heat resistant, pressure resistant, and cold resistant.

product information: