Inkbird Temperature Controller Socket 1200W 10A Backlit Display

Product Description Previous page Intelligent Temperature Controller

Work Intermittently: To set the controller to work intermittently for 12 hours and then stop for 12 hours before starting the cycle again, simply set the START time to 12:00 and the STOP time to 12:00.

Work at a Specified Time: For the system to automatically start and keep working after a countdown of 30 minutes, set the START time to 00:30.

Stop at Specified Time: To automatically start the system and have it working for 40 minutes before stopping, set the STOP time to 00:40.

ON&OFF at Specified Time: By setting the START time to 00:30 and the STOP time to 00:40, the system will countdown for 30 minutes, start working for 40 minutes, and then stop.

Set Temperature for Heating or Cooling: For heating, set the START temperature to a value lower than the STOP temperature (e.g. 50°F - 80°F). For cooling, set the START temperature to a higher value than the STOP temperature (e.g. 70°F - 40°F).

Next page 1 P01 Cycle Time 2 P02 Count Down ON 3 P03 Count Down OFF 4 P04 Count Down ON&OFF 5 Heating/Cooling

Previous page High & Low Temperature Alarm: Ensure safety and reliability by customizing alarm values for high and low temperatures. The built-in buzzer can be silenced.

Convenient & Backup: The memory function saves all set parameters in case of power failure.

Clear & Readable: The backlit LCD screen provides excellent visibility and allows for easy temperature viewing and adjustments even in the dark.

Next page 1 Temperature Alarm 2 Backup Memory 3 Backlit Screen 4 Controller Parameter

Versatile For All Your Needs Child Lock: Enable the child lock by simultaneously pressing and holding the UP and DOWN buttons for 3 seconds.

Refrigeration Delay: Set the delay time for refrigeration to any value between 0 and 10 minutes. The default setting is 00:00.

Temperature Calibration: Adjust the temperature calibration within the range of -9.9℉~9.9℉/-4.9℃~4.9℃. The default setting is 0.0℃/0.0℉.

IP67 Waterproof: With a 2m length, the IP67 waterproof temperature probe is versatile and can be used for various applications. The plug & play feature ensures easy programming and safe use. Supports temperature mode, cycle time mode, and countdown mode with a maximum output of 10A/120V 1200W.

🛡️🛡️Safer In Use: The temperature controller supports high and low temperature alarms, allowing for stricter temperature control. The buzzer can be muted. It also features temperature calibration and refrigeration delay to ensure accurate temperature control and safe operation.

🌡️🌡️Temperature Mode: Set the START and STOP temperatures to automatically switch between heating and cooling modes. When the Start Temperature is greater than the Stop Temperature, it enters cooling mode; when the Start Temperature is less than the Stop Temperature, it enters heating mode.

⏲️⏲️Timing Function: Choose from four modes: P01 Cycle Time Mode, P02 Countdown ON Mode, P03 Countdown OFF Mode, and P04 Countdown ON&OFF Mode. The timing range is from 0 to 99 hours and 59 minutes. Please note that the temperature mode and timing function cannot be used simultaneously.

🌟🌟More Functions: The temperature controller features an IP67 waterproof temperature probe that can be submerged in water or inserted into the soil. The backlit LCD screen provides easy visibility in the dark. It also supports temperature calibration, factory reset, child lock, and memory function to save parameters after a power failure.

🏠🌱Wide Application: Suitable for greenhouses, reptiles, incubators, terrariums, freezers, refrigerators, heaters, home brewing, zoos, fermentation, heating mats, and other temperature control systems. Can also be used as a timer with cycle timing and countdown.

product information: